AS2047

AS/NZS 2047 governs the performance requirements for windows in buildings, covering structural strength, water penetration resistance, and air infiltration control under specified test pressures. AS 1288 addresses the selection and use of glass in buildings, including safety glazing requirements for areas prone to human impact, balustrades, and overhead glazing, as well as guidance on glass thickness selection relative to wind load and panel size. These are typically read alongside AS/NZS 1170.2, the wind actions standard, which determines the design wind pressures a building envelope — and therefore its windows and doors — must be engineered to withstand based on regional wind classification, terrain category, and building height.

This layered approach matters because Australia and New Zealand present some of the more demanding climate and structural design conditions in the world for fenestration products: cyclone-prone regions in northern and coastal Australia require significantly higher wind load and debris-impact resistance; coastal areas across both countries demand corrosion-resistant hardware and finishes; and bushfire-prone zones carry additional requirements under AS 3959 for window and door assemblies used in Bushfire Attack Level (BAL)-rated construction. Meeting AS/NZS requirements means a product has been evaluated against these region-specific stresses rather than only generic performance benchmarks.

For architects, builders, and developers, specifying AS/NZS-compliant windows and doors streamlines the certification and approval process with local building surveyors and certifiers, since compliance documentation tied to recognized standards is generally accepted as sufficient evidence of code conformity — reducing the need for project-specific testing or additional engineering sign-off. It also gives project teams confidence that structural performance, water tightness, and safety glazing requirements have been independently validated against conditions specific to the Australian and New Zealand markets, rather than standards developed for other regions with different climate and risk profiles.

By offering AS/NZS-compliant window and door systems, we are equipped to support both residential and commercial projects across Australia and New Zealand's diverse climate zones — from cyclone-affected coastal regions to bushfire-prone areas and standard urban developments — helping specifiers meet local code requirements while ensuring long-term structural and weatherproofing performance.